Cim Upgrade; Figure 81: Cim Upgrade From Kx Flash - Raritan Dominion KX II Server KX2-432 User Manual

120

CIM Upgrade

Use this procedure to upgrade CIMs using the firmware versions stored in the memory of your
Dominion KX II unit. In general, all CIMs are upgraded when you upgrade the device firmware
using the Firmware Upgrade
Note: Only D2CIM-VUSB and D2CIM-PWR can be upgraded from this page.
To upgrade CIMs using the Dominion KX II memory :
1. Select Maintenance > CIM Firmware Upgrade. The CIM Upgrade from KX Flash page
opens:
2. The Port (number), Name, Type, Current CIM Version, and Upgrade CIM Version are
displayed for easy identification of the CIMs.
3. Check the Selected checkbox for each CIM you want to upgrade.
Tip: Use the Select All and Deselect All buttons to quickly select all (or deselect all) of the CIMs.
4. Click the Upgrade button. You are prompted to confirm the upgrade.
5. Click OK to continue the upgrade. Progress bars are displayed during the upgrade. Upgrading
takes approximately 2 minutes (or less) per CIM.
To exit without upgrading:
Click the Cancel button.
page. Use the CIM Upgrade page to upgrade new CIMs.

Figure 81: CIM Upgrade from KX Flash

D KX II U G
OMINION SER UIDE