Network Settings; Figure 56: Network Settings - Raritan Dominion KX II Server KX2-432 User Manual

90

Network Settings

Use the Network Settings page to customize the network configuration (e.g., IP Address,
discovery port, and LAN interface parameters) for your Dominion KX II unit.
Important: Dominion KX II must be rebooted for new network settings to take
effect. Before changing the network configuration, ensure that there are no
other active user connections to the device; all connections will be dropped
when the KX II unit reboots.
Basically, there are two ways to setup your IP Configuration:
•
None. This option is the recommended option (Static IP). Since the Dominion KX II is
part of your network infrastructure, you most likely do not want its IP Address to change
frequently. This option allows you to set the network parameters.
•
DHCP. The IP Address is automatically assigned by a DHCP server.
To change the network configuration:
1. Select Device Settings > Network. The Network Settings page opens.
2. Update the Network Basic Settings. Refer to
about each of the fields.
3. Update the Network Miscellaneous Settings. Refer to
more information about each of the fields.
4. Update the LAN Interface Settings. Refer to
about each of the fields.
5. Click OK to set these configurations. If your changes require rebooting the device, a reboot
message appears.

Figure 56: Network Settings

Network Basic Settings
Network Miscellaneous Settings
LAN Interface Settings
D KX II U G
OMINION SER UIDE
for more information
for
for more information