Configuring A Dial-Up Connection - Siemens HC15 Getting Started Manual

Getting Started with HC15
Confidential / Preliminary
4.1.2

Configuring a Dial-up Connection

Every newly created dial-up connection should be configured before using it to establish a
PPP connection.
Open the Control Panel, double-click Network Connections, select the dial-up connection
you want to configure. In the resulting Connect... dialog, press the Properties button.
On the General tab, select the modem you want to configure. The correct dial string *99***1#
should already be given, if entered before in the Phone number box when the dial-up
connection was added (see Chapter 4.1.1).
HC15_startup_v01 Page 26 of 31
s
2007-01-22