Installing Usb And Ethernet Drivers - Siemens HC15 Getting Started Manual

Getting Started with HC15
Confidential / Preliminary
2.4

Installing USB and Ethernet Drivers

The HC15 driver package consists of three virtual devices, one by one automatically
installed:
•
Siemens USB Com Port driver
•
Siemens Wireless Ethernet Adapter driver
•
Siemens HSDPA USB Modem driver
During the installation, the HC15 USB interface will be assigned two virtual COM ports, one
for the virtual modem port and one for the virtual application port. Windows will automatically
allocate the next available COM port to each virtual interface.
After plugging the USB cable Windows detects the HC15 as a new USB device.
Click Finish to complete the installation
of the "Siemens USB Com Port"
HC15_startup_v01
The Found New Hardware Wizard will
start. Click Next to proceed with the
installation of the "Siemens USB Com
Port".
The progress of the driver installation is
indicated.
It is possible that there are up to 3
warning
drivers are not digitally signed. Please
ignore the messages and press Continue
anyway.
Page 9 of 31
s
messages saying
2007-01-22
that the