Uninstalling Drivers And The Connection Manager - Siemens HC15 Getting Started Manual

Getting Started with HC15
Confidential / Preliminary
Siemens USB Com Port
•
AT command interface, also referred to as "Application" port if queried using the
AT^SQPORT command.
•
Mainly intended for controlling the HC15 module, for receiving URCs, can be used also
for sending, receiving, writing and reading short messages. Not intended as data
interface for HSDPA and GPRS.
•
The virtual COM port Windows has assigned to this port is listed in the Device Manager
under Ports (COM&LPT).
Siemens Wireless Ethernet Adapter
•
Wireless network adapter intended for HSDPA and GPRS data connections.
•
Listed in the Device Manager under Network adapters.
•
Software controlled by the Siemens Connection Manager. To open the program in
Windows XP, click Start, point to Programs, select Siemens, select HSDPA USB Modem
and click Connection Manager. See chapters 3.10 and 3.10.1 for details of how to set up
a connection.
2.6

Uninstalling Drivers and the Connection Manager

Select Control Panel -> Add or Remove Programs and Connection Manager
Press Remove to select the uninstaller of the Connection Manager and the HC15 drivers.
HC15_startup_v01
Please press Yes to start the uninstaller.
The Connection Manager and all HC15
drivers will be removed.
Page 13 of 31
s
2007-01-22