Siemens HC15 Getting Started Manual page 28

Getting Started with HC15
Confidential / Preliminary
On the Networking tab, the default settings
are acceptable in most cases: The drop-down
menu shows PPP: Windows 95/98/NT/2000,
Internet for the type of dialup server as
default.
In the PPP settings box, verify that Enable
LCP extensions,
compression are selected and click OK.
Select the Internet Protocol (TCP/IP) on the Networking tab and press the Properties button
to go to the General page:
In most cases, it is sufficient to accept the
default settings:
Obtain an IP address automatically and
Obtain DNS server address automatically.
Otherwise, you have to select the options
Use the following IP address / Use the
following DNS addresses and specify the IP
addresses provisioned by your network
operator.
The Advanced button
opens a further
property page where
you can set your
preferences when
working in a local
network and a dial-up
network at the same
time.
HC15_startup_v01
Enable software
Page 28 of 31
s
2007-01-22