Siemens optiPoint 500 Service Manual page 76

IP Adapter
Administration Via the Web Browser
9. Click "CorNet TC parameters" and enter the phone number, the CorNet TC password and
the operation mode. The operation mode must be entered. A maximum of 24 characters
are permitted for the first two input fields.
If more than 24 characters are input, the following message appears:
– "The submitted data contained an error: Invalid Phone number: <invalid value>"
– "The submitted data contained an error: Invalid CorNet TC login password: <invalid
value>"
Return to
10. Click "Speech parameters" and select the appropriate audio parameters.
The setting of the jitter buffer depends on the properties of the customer network (LAN) in each
case. Depending on the quality of the network, a zero speech delay ("Short" setting) or a sig-
nificant speech delay ("Long" setting) may occur.
7-12
WARNING -
Changing any of these parameters will require to
subsequently restart the terminal to activate the new values
CorNet TC parameters
Phone number:
CorNet TC login password:
(optional)
Operation mode:
Submit
Administrator settings
123456
phone-side
Reset
Home
Nur für den internen Gebrauch
Options are:
phone-side
system-side
P31003-E8400-A100-3-7620
Service Manual