System Setup - Sun Microsystems Sun Enterprise 220R Owner's Manual

2
C H A P T E R

System Setup

This chapter, used with the Sun Enterprise 220R Server Setup and Rackmounting Guide
describes how to rackmount a server and attach all cords and cables needed to get
the Sun Enterprise 220R server up and running. Where software is involved, this
chapter explains some of what you need to do, and then points you to the
appropriate software manuals for the rest of the information.
The following information is covered in this chapter:
"About the Parts Shipped to You" on page 12
"About Server Rackmounting" on page 18
"About Communicating With the Server" on page 28
Tasks covered in this chapter include:
"How to Install the Sun Enterprise 220R Server" on page 13
"How to Place the System Into the Rack" on page 23
"How to Remove the System From the Rack" on page 20
"How to Attach an Alphanumeric (ASCII) Terminal" on page 29
"How to Configure a Local Graphics Console" on page 31
"How to Power On the System" on page 34
"How to Install the System Software" on page 37
"How to Select the Boot Device" on page 40
"How to Power Off the System" on page 43
11