To Adjust The Print Image Quality In The Black And White Mode - Toshiba e-STUDIO6520c Imaging Manual
Hide thumbs
Also See for e-STUDIO6520c:
- Service handbook (648 pages) ,
- Management manual (226 pages) ,
- Copying manual (210 pages)
Table of Contents
Advertisement
3. Printer-specific Adjustments
3.14.2 To Adjust the Print Image Quality in the Black and White Mode
* Perform the adjustment in accordance with the procedures below.
* Both the service technician and the user can use procedure (1).
* Only the service technician must use procedures (2) and (3).
(1) Change the "Halftone" option on the printer driver.
For Windows
PCL6
PS3
XPS
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Select "Detail" from among the "Halftone" options in the "Basic" tab.
e-STUDIO5520C/6520C/6530C
* This adjustment will have an effect only on Black and white mode printing.
3-56
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Advertisement
Table of Contents
