Toshiba e-STUDIO6520c Imaging Manual page 132

3. Printer-specific Adjustments
PCL6 PS3 XPS
(3) Enter adjustment mode [05]. Change the values for codes [8042 to 8065] or [8268 to 8275] to adjust the
color density.
• Adjust the value for [05] code corresponding to the print option to be applied (PDL and Halftone).
Ex.: • When printing on Windows is performed with the following options selected: PCL6, Image Quality
Type = General, Halftone = Auto
> Text area, Graphic and image area
Change the values of "Smooth" for Y: 05-8058, M: 05-8059, C: 05-0860 and K: 05-8061.
• When printing on Macintosh is performed with the following option selected: Image Type =
Photograph, Halftone = Smooth
> Change the values for Y: 05-8050, M: 05-8051, C: 05-8052 and K: 05-8053.
* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)
Color to
PDL
adjust
PCL5c
PS3
(600dpi)
Y
(Yellow)
PS3
(1200dpi)
XPS
PCL5c
PS3
(600dpi)
M
(Magenta)
PS3
(1200dpi)
XPS
PCL5c
PS3
C (600dpi)
(Cyan)
PS3
(1200dpi)
XPS
PCL5c
PS3
(600dpi)
K
(Black)
PS3
(1200dpi)
XPS
* Set the value in increments of approximately 20, while checking the printouts until the optimum value is
obtained.
e-STUDIO5520C/6520C/6530C
Mac
* This adjustment will have an effect only on Auto or Color mode printing.
Halftone [05] code Subcode Recommended value
Smooth 05-8058 0/1/2
Detail 05-8062 0/1/2
Smooth 05-8050 0/1/2
Detail 05-8054 0/1/2
Smooth 05-8268 0/1/2
Detail 05-8272 0/1/2
Smooth 05-8042 0/1/2
Detail 05-8046 0/1/2
Smooth 05-8059 0/1/2
Detail 05-8063 0/1/2
Smooth 05-8051 0/1/2
Detail 05-8055 0/1/2
Smooth 05-8269 0/1/2
Detail 05-8273 0/1/2
Smooth 05-8043 0/1/2
Detail 05-8047 0/1/2
Smooth 05-8060 0/1/2
Detail 05-8064 0/1/2
Smooth 05-8052 0/1/2
Detail 05-8056 0/1/2
Smooth 05-8270 0/1/2
Detail 05-8274 0/1/2
Smooth 05-8044 0/1/2
Detail 05-8048 0/1/2
Smooth 05-8061 0/1/2
Detail 05-8065 0/1/2
Smooth 05-8053 0/1/2
Detail 05-8057 0/1/2
Smooth 05-8271 0/1/2
Detail 05-8275 0/1/2
Smooth 05-8045 0/1/2
Detail 05-8049 0/1/2
3-12
Set a value larger than 128
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Acceptable
Default
value range
0 to 255 128