Toshiba e-STUDIO6520c Imaging Manual page 139

For Macintosh
* This adjustment will have an effect only on full-color printing.
Mac
Open the print dialog box. Select "Black - Auto" from among the "Pure Black and Gray" options.
* The menu to select varies according to the operating system. Refer to the table below and select the menu.
OS
10.2.x
10.3.x / 10.4.x/10.5x
Caution after the adjustment
The adjustment allows gray areas always to be reproduced using all color toners (C, M, Y and K). As a result,
undesired colors may look blended, depending on the print image. Therefore, carefully perform the adjustment,
while checking the printouts.
e-STUDIO5520C/6520C/6530C
"Printer Features" "Feature Sets: Color settings 2"
"Color Settings 1" "Pure Black and Gray"
3-19
3. Printer-specific Adjustments
Menu
"Pure Black and Gray"
© 2008 TOSHIBA TEC CORPORATION All rights reserved