Toshiba e-STUDIO6520c Imaging Manual page 74

2. Copier-specific Adjustments
Soft
Default:
Setting value "103":
<Note>
"Minimizing moiré" and "Sharpening the copy image" are mutually contradictory. When the
adjustment is performed to minimize moiré, the resolution of the copy image may decrease.
Caution after the adjustment
Nothing in particular.
Remarks
• Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may cause a
loss in MFP performance, including degradation in the image quality.
e-STUDIO5520C/6520C/6530C
-4 -3 -2 -1 0
| | | | |
-100 -75 -50 -25 0
-100 -100 -75 -50 -25
Since "-25" is assigned to the center, the image quality
remains the same even if the indicator is changed from
"-3" to "-4".
2-40
+1 +2 +3 +4
Sharp
| | | |
+25 +50 +75 +100
0 +25 +50 +75
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Assigned adjustment
value of sharpness