Toshiba e-STUDIO6520c Imaging Manual page 161

Procedures
* Both the service technician and the user can perform all adjustments.
(1) Change the "Sharpness" option on the printer driver.
For Windows
PCL6 PS3 XPS
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Uncheck the "Use Sharpness Filter" checkbox in the "Image Attribute" tab. To make a smoother image,
check its checkbox and then set the value within a range of "-1" to "-4."
• Setting "-4" provides the smoothest (softest) print image.
The value "OFF" of sharpness intensity adjustment is positioned as shown below.
* Sharpness adjustment is not available when 1200 dpi is selected for PS3 printer driver.
e-STUDIO5520C/6520C/6530C
* This adjustment will have an effect only on Auto or Color mode printing.
3-41
3. Printer-specific Adjustments
© 2008 TOSHIBA TEC CORPORATION All rights reserved