Toshiba e-STUDIO6520c Imaging Manual page 282

5. Scanning-specific Adjustments
Procedures
* The service technician must perform all adjustments.
(1) Enter adjustment mode [05]. Change the values for codes [1075 to 1077] to adjust the black density of a
scanned-in image.
Color mode Original mode [05] code
Full color
Printed image
* Setting "0" provides the lightest black, while setting "4" the darkest.
Caution after the adjustment
The adjustment may possibly provide the extremely dark background. Therefore, carefully perform the
adjustment, while checking the scanned-in image.
e-STUDIO5520C/6520C/6530C
Recommended value
Text 05-1075
Set a value larger than 0.
05-1076
Photo 05-1077
5-16
Acceptable
value range
0 to 4
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Default
0