Standard Extender/Splitter Installation - Tripp Lite B127-1A1-HH Owner's Manual

Standard Extender/Splitter Installation

Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series cables are made with 24 AWG solid-wire
cabling.
3) The installation diagram shows the B127-004-H local transmitter unit. The
B127-002-H installation is the same, except there are only two remote ports and
no local monitor port.
4) External power is not required for the B127-100-H and B127-100-H-SR units.
5) These installation instructions can be used for the B127-002-2H2 and
B127-004-H4H extender kits.
1-427-933919.indb 9
B127-004-H4H
extender kit
OPTIONAL
LOCAL MONITOR
1
Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz
2
Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz
3
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
B127-100-H
B127-100-H
B127-004-H
HDR PLAYER
9
B127-100-H-SR
B127-100-H-SR
3/18/2019 4:56:29