Using The Cli - Zhone 4821-A2 Installation Manual

Configuration

Using the CLI

36
BitStorm 4800 Express Model 4821-A2 Installation Guide
A command line interface (CLI) can be used to configure and monitor the
unit. The CLI is available from a PC or terminal connected to the Console
port, or from a Telnet session with the device.
The following commands are available:
Table 4: CLI Commands
Command Function
clear Clear the system log.
configure Enter Configuration mode.
copy Copy from one file to another.
date Set the time zone and date format.
end If user is in Administrator mode, shifts to User mode; if
user is in User mode, positions interface at top of menu
tree.
exit Terminate current session.
firmware Download or apply new firmware.
paging Enable or disable paging (more prompt) for this
session.
privilege Enable administrator mode.
restart Restart a unit.
show Display configuration, statistics, and status.
technical-support Display information for contacting technical support.
test Test the system.
Descriptions of some essential configuration commands follow.
4821-A2-ZN21-30