Table of Contents
Advertisement
Installation
22
BitStorm 4800 Express Model 4821-A2 Installation Guide
6 Install two wood screws (not provided) at the same height above the floor
and 18.75 inches (476.25 mm) apart. Do not completely tighten the
screws. Leave them so their heads are about 1/4 inch (6 mm) from the
wall.
7 Hang the unit from the wood screws to verify that the screws are properly
placed. The screws should freely slide into the top of the key slots in the
brackets.
Do not fasten the unit to the wall until after it is completely cabled and
tested.
4821-A2-ZN21-30
Advertisement
Table of Contents
