Cables Required - Zhone 4821-A2 Installation Manual

Cables Required

4821-A2-ZN21-30
Table 2 shows all the cables that may be required for your installation.
Table 2: Cable Descriptions
Connector
Name Connector and Cable
DSL PORTS 50-pin RJ21X Telco-type
1–24 straight connector and
50-wire cable. Two cables
DSL Ports 25–48 required for 48-port model.
(if installed)
Port 2 8-position modular plug
10/100BaseT and 8-wire Category 5 or
better unshielded twisted
pair (UTP) cable.
Port 1 8-position modular plug
10/100BaseT and 8-wire Category 5 or
better unshielded twisted
pair (UTP) cable.
CONSOLE DB9 plug connector and
shielded cable.
The other connector
depends on the serial
port on your terminal or
PC, but normally is a
DB9 socket.
The other connector
depends on the serial
port on your modem, but
normally is a DB25 plug.
A null modem
(crossover) cable is
required.
BitStorm 4800 Express Model 4821-A2 Installation Guide
Cables Required
For Connecting . . .
Up to 24 DSL ports per
cable to a POTS splitter.
The BitStorm 4800
Express to a network.
A Network Management
System (NMS) over a
Local Area Network
(LAN) employing
10BaseT or 100BaseT.
The BitStorm 4800
Express to one of the
following:
A terminal or a PC
with a terminal
emulation program, or
A modem.
15