Table of Contents
Advertisement
10/100BaseT Uplink (Port 2)
4821-A2-ZN21-30
6 Secure the cables as required for strain relief.
Port 2 is the uplink for the DSLAM. A straight-through cable can be used
regardless of the destination interface, since the port automatically
distinguishes between an MDI and an MDIX.
To use Port 2 as the uplink:
1 Connect an 8-position modular cable to Port 2.
2 Connect the other end of the cable to the uplink interface, such as an
Ethernet switch.
BitStorm 4800 Express Model 4821-A2 Installation Guide
10/100BaseT Uplink (Port 2)
27
Advertisement
Table of Contents
