Dsl Ports - Zhone 4821-A2 Installation Manual

Cabling

DSL Ports

26
BitStorm 4800 Express Model 4821-A2 Installation Guide
The BitStorm 4800 Express DSL connector supports the tip and ring
connections of up to 24 DSL ports over a 50-position cable. There are two
DSL connectors on the 48-port model.
You must connect the unit to a separate POTS splitter. The Model 6051 POTS
Splitter must be used for customer premises applications in Canada.
To cable the DSL Ports:
1 Insert a cable tie (provided) through the top of the anchor mount next to
the DSL PORTS 1–24 connector.
2 If the connector for your cable has a short captive screw, attach the cable
to the DSL PORTS 1–24 connector and fasten it to the jack screw with its
short captive screw.
#4-40
Jack Screw
Short
Screw
Connector
3 If the connector for your cable has a long captive screw, remove the
provided jack screw from the threaded hole next to the DSL PORTS 1–24
connector. Attach the DSL PORTS 1–24 connector to the unit using the
long, captive pan-head screw (provided).
4 Tighten the cable tie around the connector and trim the excess.
5 For a 48-port model, repeat
DSL Ports 25–48 for DSL PORTS 1–24.
Anchor
Mount
50-Pin
02-17083
02-17084
Step 1 through Step 4, substituting
4821-A2-ZN21-30