Preparation - Zhone 4821-A2 Installation Manual

Installation

Preparation

14
BitStorm 4800 Express Model 4821-A2 Installation Guide
Consider the following before installing the BitStorm 4800 Express IP
DSLAM:
Installation Site
Your installation site should be well ventilated, clean, and free of
environmental extremes.
Installation Options
The BitStorm 4800 Express may be:
— Mounted with the included mounting brackets in a standard 19-inch
(483 mm) or 23-inch (584 mm) rack (including both Bay Networks
and Nortel 23-inch racks), or, with separately purchased mounting
brackets, in a 21-inch (535 mm) ETSI rack. ETSI brackets are
available from Paradyne. See
As many BitStorm 4800 Express units may be mounted in a standard
rack as there are 1.75-inch (44.45 mm) spaces in the rack, so long as
adequate cooling is provided.
— Mounted vertically against a wall.
The standard mounting brackets provided can be fastened to the base
of the unit for wall mounting.
— Set on a shelf or desktop.
Up to five BitStorm 4800 Express units may be stacked on a shelf or
desktop.
Power
The BitStorm 4800 Express operates from a 90 to 265 VAC, 47 to 63 Hz
power source.
Cabling
No cable except the power cable is provided with the BitStorm 4800
Express. See Table 2, Cable
need to procure before installation.
Appendix B-, Equipment
Descriptions, to determine what cables you
4821-A2-ZN21-30
List.