Mounting; Network Connection; Setup; Technical Assistance - Valcom VIP-D425 User Manual

Ip poe surface mount digital clocks

Hide thumbs

Table of Contents

MOUNTING

Remove the side screws holding the mounting

plate/rear panel to the enclosure. Mount the plate to

the wall or a standard double-gang electrical box

using appropriate hardware such as #8 pan head

screws (not supplied). After making the required

connections, reattach the enclosure to the mounting

plate, rear panel.

NETWORK CONNECTION

The VIP-D425, VIP-D440, VIP-625, and VIP640

have one RJ-45 network connector on the rear

panel. See Figure 1. Connect a CAT-5 patch cable

from the VIP-D425, VIP-D440, VIP625, or VIP640

into an Ethernet switch. If a PoE switch is not

available, a PoE mid-span injector may be used to

supply power to the clocks.

SETUP

Information specific to your application will need to

be programmed into the VIP's using a computer.

The PC used for programming should be connected

to the same subnet as the VIP's. Setup will be

done using the IP Solutions Setup Tool. Download

the latest version of the free IP Solutions Setup

Tool from Valcom web site at

www.valcom.com/vipsetuptool.

Figure 1. Connections (Rear)

Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of

normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or

refund of any such defective device within the warranty period, provided that:

1. inspection by Valcom, Inc. indicates the validity of the claim;

2. the defect is not the result of damage, misuse or negligence after the original shipment;

3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service charge plus parts

and labor will be applied to units defaced or physically damaged);

4. freight charges for the return of products to Valcom are prepaid;

5. all units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to

additional charges for parts and labor).

This Limited Warranty is in lieu of and excludes all other warranties, expressed or implied and in no event shall Valcom, Inc. be liable for any

anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation,

maintenance, installation, removal or use of the product. The maximum liability of Valcom under this warranty is limited to the purchase price of the

specific Product covered by the warranty.

Disclaimer. Except for the Limited Warranty provided herein, the product is provided "as-is" without any warranty of any kind whatsoever including, without

limitation, any WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.

This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified

immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.

RJ45