System Requirements For Installing The Ut60D Interface Program - UNI-T UT60D Operating Manual

RS232C Serial Port (2)
C. System Requirements for Installing the UT60D
Interface Program
To use UT60D Interface Program, you need the following
hardware and software:
l
An IBM PC or equivalent computer with 80486 or
higher processor and 640 x 480 pixel or better
monitor.
l
Microsoft Windows 95 or above.
l
At least 8MB of RAM.
l
At least 8MB free space in hard drive.
l
Can access to a local or a network CD-ROM.
l
A free serial port.
l
A mouse or other pointing device supported by
Windows.
Please refer to the included "Installation Guide &
Computer Interface Software" for installing and
operating instructions of the UT60D Interface Program.
This operating manual is subject to change without notice.
Model UT60D: OPERATING MANUAL
~ END ~
39