Safety Requirements - UNI-T UT8806E Service Manual

Service Manual
Certification
Certification
Waste
Warning
The UT8806E Desktop Digital Multimeter only supports measurement of power supplies
under CAT II (600V) type overvoltage conditions, so please use the instrument strictly in
accordance with this measurement environment.

Safety Requirements

Warning
Preparation
before use
Check all
terminal rated
values
Use the power
cord properly
Instrument
Grounding
AC power
supply
Instruments.uni-trend.com
UKCA indicates a registered trademark of UK
Complies with UL STD 61010-1, 61010-2-030 and CSA STD C22.2 No.
61010-1 and 61010-2-030
Do not put the equipment and accessories in the trash. The wasted items
must be properly disposed of in accordance with local regulations.
This environment-friendly use period (EFUP) mark indicates that
dangerous or toxic substances will not leak or cause damage within this
EFUP indicated time period. The environment-friendly use period of this
product is 40 years, during which it can be used safely. Upon expiration
of this period, it should enter the recycling system.
Please connect this device to AC power supply with the power cable provided.
The AC input voltage of the line reaches the rated value of this device. See the product
manual for specific rated value.
The line voltage switch of this device matches the line voltage.
The line voltage of the line fuse of this device is correct.
It is not used to measure the main circuit.
Please check all rated values and marking instructions on the product to avoid fire and
impact of excessive current. Please consult the product manual for detailed rated
values before connection.
You can only use the special power cord for the instrument approved by the local and
state standards. Please check whether the insulation layer of the cord is damaged or
the cord is exposed, and test whether the cord is conductive. If the cord is damaged,
please replace it before using the instrument.
To avoid electric shock, the grounding conductor must be connected to the ground.
This product is grounded through the grounding conductor of the power supply. Please
be sure to ground this product before it is powered on.
Please use the AC power supply specified for this device. Please use the power cord
approved by your country and confirm that the insulation layer is not damaged.
UT8806E Desktop Digital Multimeter
6 / 29