Operation Of Hold Mode; Full Icons Display; Sleep Mode - UNI-T UT60D Operating Manual

Operation of Hold Mode

Warning
To avoid possibility of electric shock, do not use
Hold mode to determine if circuits are without power.
The Hold mode will not capture unstable or noisy
readings.
The Hold mode is applicable to all measurement functions.
l
Press HOLD H to enter Hold mode; the Meter beeps.
l
Press HOLD H again or RANGE or turn the rotary
switch to exit Hold mode; the Meter beeps.
l
In Hold mode,

Full Icons Display

If the Meter is turned on with HOLD H being pressed
on, the LCD will display all the icons and maintain this
mode until the LCD enters normal display mode when
the HOLD H is pressed again.

Sleep Mode

l
To preserve battery life, the Meter automatically
turns off if you do not turn the rotary switch or press
any button for 10 minutes.
l
The Meter can be activated by turning the rotary
switch or pressing any button other than
l
The Meter will display the last measurement value
before it entered Sleep Mode if it is activated by
pressing any button other than
the continuity measurement mode before it entered
Sleep Mode.
If the Meter is activated by turning the rotary switch,
it will start from the switch selected function.
l
To disable the Sleep Mode, press Hz, RANGE or
RS232C button while turning on the Meter.
Model UT60D: OPERATING MANUAL
is displayed.
and it was not in
27
.