Functional Buttons - UNI-T UT60D Operating Manual

Functional Buttons (1)

Below table indicated for information about the functional
button operations.
Measuring
Button
Function
Display
Backlight
V
Hz
(BLUE)
HzRPM
A
Hz
mA
Hz
Hz
A
Hz DC/AC
voltage or
DC/AC
current
Model UT60D: OPERATING MANUAL
Operation Performed
Press once to turn the Display
Backlight on and it shall shut off
automatically in 10 seconds later.
Switches between AC and DC
voltage; the Meter beeps. DC is
default.
Switches between continuity and
diode and resistance
measurements; the Meter beeps.
Resistance is default.
Switches between Hz unit display
and RPM unit display; the Meter
beeps.
This function is suitable for
RPM Frequency
interchanging measurement.
Switches between AC and DC
current range from 340.0 A to
3400 A; the Meter beeps. DC is
default.
Switches between AC and DC
current range from 34.00mA to
340.0mA; the Meter beeps. DC is
default.
Switches between AC and DC
current 10.00A; the Meter beeps.
DC is default.
1. Press to start the frequency
counter; the Meter beeps.
2. Press again to return to the
previous measurement mode;
the Meter beeps.
11