UNI-T UT60D Operating Manual page 21

Measurement Operation (5)
l
Connect the test leads to the proper terminals as
said above to avoid error display.
l
The LCD will display
wrong connection.
l
The unit of diode is Volt (V), displaying the positive-
connection voltage-drop value.
l
When diode testing has been completed, disconnect
the connection between the testing leads and the
circuit under test.
Resistance Measurement
W
The resistance ranges are: 3.400k , 34.00k , 340.0k ,
3.400M and 34.00M
connect the Meter as follows:
1. Insert the red test lead into the HzV
the black test lead into the COM terminal.
2. Set the rotary switch to
measurement ( ) is default or press BLUE button
to select measurement mode.
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
Model UT60D: OPERATING MANUAL
indicating open-circuit for
(see figure 7)
red black
(figure 7)
. To measure resistance,
terminal and
, resistance
21