Model UT58E: OPERATING MANUAL
Sleep Mode
To preserve battery life, the Meter automatically turns off
if you do not turn the rotary switch or press any button
for around 15 minutes. When the Meter is under sleep
mode, it consumes 10 A current.
To activate the Meter, press POWER for two times
Operation of Hold Mode
Warning
To avoid possibility of electric shock, do not use Hold
mode to determine if circuits are without power. The
Hold mode will not capture unstable or noisy readings.
To use the Hold mode as follows:
l Press HOLD to enter Hold mode.
l Press HOLD again to exit Hold mode.
l In Hold mode,
H
is displayed.
26