Main Beam Horizontal Adjustment; Main Beam Vertical Adjustment; Dipped Headlight Vertical Adjustment - Triumph Sprint ST Handbook

Main Beam Horizontal Adjustment

The main beam horizontal adjustment screw
is accessible without removing any panels. It
can be reached from below the lights.
Switch the main beam on.
Turn the adjustment screw clockwise to move
the beam to the left or anti-clockwise to move
the beam to the right.
Switch the headlights off when the beam
setting is satisfactory.

Main Beam Vertical Adjustment

ccpj
1. Windscreen
2. Cover panel
3. Adjustment screw access
Remove the screws securing the windscreen
to the cockpit. Slide the windscreen upwards
and to the rear to remove it.
Remove the screws securing the cover panel
and remove the panel.
The adjustment screw is now accessible.
Switch the main beam on.
Maintenance and Adjustment
Turn the vertical adjustment screw clockwise
to raise the beam or anti-clockwise to lower
the beam.
Switch the headlights off when the beam
setting is satisfactory.
Refit the cover panel and windscreen.
Dipped Headlight Vertical
Adjustment
The dipped headlight vertical adjustment
screws are accessible without removing any
panels. They can be reached from below the
lights on the left or right hand side. Turn the
handlebars for ease of access.
1
Switch the headlight beam on.
Turn the
anti-clockwise to raise the beams or clockwise
to lower the beams.
2
Switch the headlights off when the beam
settings are satisfactory.
3
vertical adjustment screws
99