Setting Fax/Tel Mode; Receiving Both Faxes And Telephone Calls Automatically: Fax/Tel Mode - Canon FAX-L220 User Manual

Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you only have one telephone line for fax and telephone use and want
your FAX to automatically switch between fax and voice calls.
For this mode, you need to connect the optional handset or a telephone to your FAX
( p. 2 5).

Setting Fax/Tel Mode

Follow this procedure to set the receive mode to FAX/TEL AUTO SW (Fax/
Tel Mode):
1
Press Function.
2
Press Data Registration.
3
Press OK.
4
Use
5
Press OK.
6
Use
7
Press OK.
8
Use
9
Press OK.
•
10
Press Stop to return to standby mode.
11
Confirm that FaxTel is displayed in the
LCD.
•
8 4 Receiving Faxes
or to select RX SETTINGS.
or to select RX MODE.
or to select FAX/TEL AUTO SW.
To set the options for FAX/TEL AUTO
SW (Fax/Tel Mode), see the following
pages.
If FaxTel is not displayed, follow steps
1 to 2 on page 8 2 to select Fax/Tel
Mode. After a few seconds, the LCD
returns to standby mode.
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX ONLY MODE
FAX/TEL AUTO SW
RING START TIME
Ex:
15:00 FaxTel
Ex:
15:00 FaxTel
Chapter 8