Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you only have one telephone line for fax and telephone use and want
your FAX to automatically switch between fax and voice calls.
n
For this mode, you need to connect the optional handset or a telephone to your FAX
(1 p. 2-6).
Setting Fax/Tel Mode
Follow this procedure to set the receive mode to FAX/TEL AUTO SW
(Fax/Tel Mode):
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
Use ∂ or ¨ to select RX SETTINGS.
4
5
Press Set.
Use ∂ or ¨ to select RX MODE.
6
7
Press Set.
Use ∂ or ¨ to select FAX/TEL
8
AUTO SW.
9
Press Set.
• To set the options for FAX/TEL AUTO
SW (Fax/Tel Mode), see the following
pages.
10
Press Stop to return to standby mode.
11
Confirm that FaxTel is displayed in
the LCD.
• If FaxTel is not displayed, press
Receive Mode to select Fax/Tel Mode.
After a few seconds, the LCD returns to
standby mode.
Chapter 8
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX ONLY MODE
FAX/TEL AUTO SW
RING START TIME
Ex:
15:00
FaxTel
Ex:
15:00
FaxTel
Receiving Faxes
8-5