Configuration Using The Ses/Wps Or Aoss™ From The Control Panel Menu (Automatic Wireless Mode) - Brother Multi-protocol On-board Ethernet Multi-function Print Server Network User's Manual

Configuration using the SES/WPS or AOSS™ from the control
panel menu (Automatic Wireless mode)
IMPORTANT
• If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset,
press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically.
a
Plug the machine's power cord into the AC power outlet. Turn on the machine's power switch.
b
Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
72.WLAN
7.WLAN Enable
On
a
b Off
Select ab or OK
c
Turn on your Macintosh
d
Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your
desktop.
e
Double-click the Utilities icon.
Wireless configuration for Macintosh
®
.
®
using the Brother installer application (MFC-8890DW only)
5
5
77