Brother Multi-protocol On-board Ethernet Multi-function Print Server Network User's Manual page 43

l
Choose the Authentication method using a or b, and press OK.
72.WLAN
Auth. Select
Open System
a
b Shared Key
Select ab or OK
If you chose Open System, go to step m.
If you chose Shared Key, go to step n.
If you chose WPA/WPA2-PSK, go to step q.
If you chose LEAP, go to step r.
If you chose EAP-FAST/NONE, EAP-FAST/MSCHAP
1
It is shown here as EAP-FAST/MSCHAPv2.
m
Choose the Encryption type, None or WEP using a or b, and press OK.
72.WLAN
Encryption Type?
a None
WEP
b
Select ab or OK
If you chose None, go to step t.
If you chose WEP, go to step n.
n
Choose the key option; KEY1, KEY2, KEY3, KEY4 using a or b, and press OK.
72.WLAN
WEP key
KEY1:xxxxxx
a
b KEY2:
Select ab or OK
If you chose the key which shows **********, go to step o.
If you chose a blank key, go to step p.
o
If you want to change the key you chose in step n, press a or b to choose Change. Press OK. Go to
step p.
If you want to keep the key you chose in step n, press a or b to choose Keep. Press OK. Go to step t.
72.WLAN
KEY1:xxxxxx
1.Change
a
b 2.Keep
Select ab or OK
p
Enter a new WEP key. Press OK. Go to step t. (To manually enter the text, see Entering Text
on page 223.)
72.WLAN
WEP:
Enter & OK Key
Configuring your machine for a wireless network (For MFC-8890DW)
1
or EAP-FAST/GTC, go to step q.
3
33