Brother Multi-protocol On-board Ethernet Multi-function Print Server Network User's Manual page 101

s
To communicate with the configured wireless device, you must configure your computer to use the same
wireless settings. Manually change the wireless settings on your computer to match the machine's
wireless settings shown on this screen. Check the box after you confirm these settings, and then click
Next.
(The settings shown on this screen are for example only. Your settings will not be the same.)
t
Check the box after you confirm that you have completed the wireless settings, and then click Finish.
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the CD-
ROM menu.
Wireless configuration for Macintosh
®
using the Brother installer application (MFC-8890DW only)
5
91