Brother Multi-protocol On-board Ethernet Multi-function Print Server Network User's Manual page 42

b
Plug the machine's power cord into the AC power outlet. Turn on the machine's power switch.
c
Press Menu on the control panel of the Brother machine.
d
Press a or b to choose Network.
Press OK.
e
Press a or b to choose WLAN.
Press OK.
f
Press a or b to choose Setup Wizard.
Press OK.
g
If the following message appears, press a or b to choose On. The wired network interface will become
inactive with this setting.
72.WLAN
WLAN Enable ?
On
a
b Off
Select ab or OK
h
The machine will search for your network and display a list of available SSIDs. You should see the SSID
you wrote down earlier. If the machine finds more than one network use the a or b keys to choose your
network, then press OK. Go to step l.
If your access point is set to not broadcast the SSID, you will have to manually add the SSID name.
Go to step i.
i
Choose <New SSID> using a or b.
Press OK. Go to step j.
72.WLAN
SSID
a <New SSID>
b
Select ab or OK
j
Enter a new SSID name. (To manually enter the text, see Entering Text on page 223.)
Press OK.
72.WLAN
SSID:
Enter & OK Key
k
Press a or b to choose Infrastructure.
Press OK. Go to step l
If you chose Ad-hoc, go to step m.
72.WLAN
Mode Select
a Ad-hoc
Infrastructure
b
Select ab or OK
Configuring your machine for a wireless network (For MFC-8890DW)
3
32