Connecting An External Tad; Connections - Brother MFC-7340 User Manual

Chapter 7
c
Press a or b to scroll through the Caller
ID memory to choose the Caller ID you
want to view, and then press OK.
The LCD will show the caller's number
and the date and time of the call.
d
To finish viewing, press Stop/Exit.
Printing the Caller ID List
a
Press Menu, 2, 0, 3.
b
Press a or b to choose Print Report.
Press OK.
If no ID is stored, the beeper will sound
and No Caller ID will appear on the
LCD.
c
Press Start.
d
After printing has finished,
press Stop/Exit.
52
Connecting an external
TAD
You can connect an external Telephone
Answering Device (TAD) to the same line as
your machine. When the TAD answers a call,
your machine will "listen" for the CNG (fax
calling) tones sent by a sending fax machine.
7
If it hears them it will take over the call and
receive the fax. If it does not hear them, it will
let your TAD take a voice message and the
display will show Telephone.
The external TAD must answer within four
rings (we recommend you set it to two rings).
This is because your machine cannot hear
the CNG tones until the external TAD has
picked up the call. The sending machine will
send CNG tones for only eight to ten seconds
longer. We do not recommend using the toll
saver feature on your external TAD if it needs
more than four rings to activate it.
Note
If you have problems receiving faxes,
reduce the ring delay setting on your
external TAD to one or two rings.

Connections

The external TAD must be connected as
shown in the illustration below.
(Example
for
Australia)
1 TAD
7
7
1
1