Replacing The Drum Unit - Brother MFC-7340 User Manual

Hide thumbs Also See for MFC-7340:
Table of Contents

Advertisement

f
Put the new toner cartridge firmly into
the drum unit until you hear it lock into
place. If you put it in correctly, the lock
lever will lift automatically.
CAUTION
Make sure that you put in the toner
cartridge correctly or it may separate from
the drum unit.
g
Clean the corona wire of the drum unit
by gently sliding the green tab from right
to left and left to right several times.
CAUTION
Be sure to return the green tab to the home
position (a) (1). If you do not, printed pages
may have a vertical stripe.
Troubleshooting and routine maintenance
h
Put the drum unit and toner cartridge
assembly back in the machine.
i
Close the front cover.
CAUTION
DO NOT turn off the machine or open the
front cover until the LCD returns to the
standby state.

Replacing the drum unit

The machine uses a drum unit to create print
images on paper. If the LCD shows
Drum End Soon, the drum unit is near the
end of its life and it is time to buy a new one.
Even if the LCD shows Drum End Soon,
you may be able to continue printing without
having to replace the drum unit for a while.
However, if there is a noticeable deterioration
1
in the output print quality (even before
Drum End Soon appears), then the drum
unit should be replaced. You should clean the
machine when you replace the drum unit.
(See Cleaning the laser scanner window
on page 128.)
CAUTION
While removing the drum unit, handle it
carefully because it may contain toner. If
toner scatters on your hands or clothes,
wipe or wash it off with cold water at once.
B
B
137

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-7450Mfc-7440nMfc-7840nMfc-7840w

Table of Contents