General Setup; Mode Timer; Paper Settings; Paper Type - Brother MFC-7340 User Manual

3

General setup

Mode timer

The machine has three mode keys on the
control panel: Fax, Scan, and Copy.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to Fax mode default. If you choose
Off, the machine will stay in the mode you
used last.
(MFC-7840N and MFC-7840W only) Also,
this setting sets the time the machine will
change from individual user to public user
when using Secure Function Lock. (See
Switching Users on page 30.)
a
Press Menu, 1, 1.
b
Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c
Press Stop/Exit.

Paper settings

Paper type

Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Press Menu, 1, 2.
b
Press a or b to choose Thin, Plain,
Thick, Thicker, Transparency or
Recycled Paper.
Press OK.
c
Press Stop/Exit.
3

Paper size

(For Oceania)
You can use seven sizes of paper for printing
copies: A4, Letter, Executive, A5, A6, B5 and
B6 and two sizes for printing faxes: A4 or
Letter.
(For Asia)
You can use nine sizes of paper for printing
copies: A4, Letter, Legal, Executive, A5, A6,
B5, B6 and Folio and four sizes for printing
faxes: A4, Letter, Legal or Folio (8"x13").
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document or an incoming
fax on the page.
a
Press Menu, 1, 3.
b
(For Oceania)
Press a or b to choose A4, Letter,
Executive, A5, A6, B5 or B6.
Press OK.
(For Asia)
Press a or b to choose A4, Letter,
Legal, Executive, A5, A6, B5, B6 and
Folio.
3
Press OK.
c
3 Press Stop/Exit.
Note
If you chose Transparency as the paper
type (Menu, 1, 2) you will only be able to
choose Letter or A4 (Legal or Folio
for Asia) size paper in Step b.
3
3
3
21