Change The Compression Rate; Remote Card - Binatone Concept Combo 3525 Twin User Manual

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTING.
Press <MENU/OK> and <UP/DOWN> to select REMOTE ACC.
3.
Press <MENU/OK> and <UP/DOWN> to select ON or OFF to turn on
4.
or off the remote access respectively.
5. Press <MENU/OK> to confirm.

9.12.5 Change the Compression Rate

Three different compression rates (HIGH, MEDIUM and LOW) are provided
for you to select different quality levels of recording incoming message. The
lower the compression rate, the higher the recording quality level attained,
but the shorter the total recording time available. (LOW = 7 minutes,
MEDIUM = 10 minutes, HIGH = 15 minutes approximately.)
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTING.
3. Press <MENU/OK> and <UP/DOWN> to select
4. Press <MENU/OK> and <UP/DOWN> to select your desired
compression rate.
5. Press <MENU/OK> to confirm.
CC3525 system
Remote operation
1
Using a tone-dialling phone, dial your home number
2
While your outgoing message is playing, press
3
Key in your remote security code
The default code is 0000. For details of how to set a new code,
see the User Guide 9.12.6 on page 63.
Note: The <*> key can be entered during or after the OGM and the 4-digit
PIN should follow without any delays. If the 4-digit Remote Access
PIN is entered incorrectly three times consecutively, the line will be released
automatically.
4
You can also use the codes on the other side of this card
Note: If your answering machine is switched off, the phone will enter into
the remote access mode after 14 rings.
You can then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
ANS. MACHINE.
COMPRESSION.
62