Switch Between Ogms; Play The; Essages; Delete A Message On The Tam - Binatone Concept Combo 3525 Twin User Manual

9.8

Switch Between OGMs

By default, the answer machine is set in ANS & REC mode which allows
callers to leave a message. This mode can be changed to ANSWER ONLY
which does not allow callers to leave a message. In that case, your callers
will be prompted to call back later.
When the answering machine is switched ON, you can select ANS & REC
or ANSWER ONLY.
Using the Menu
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3.
Press <MENU/OK> and <UP/DOWN> to select ANSWER MODE.
4.
Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY.
5. Press <MENU/OK> to confirm.
9.9 TAM Messages
9.9.1 Play the TAM messages
If you have new messages, the base display will show e.g. 01/02 MSGS,
which means you have 1 new message out of a total of 2 messages.
New messages are played first, and then are saved as old messages, until
they are deleted. Old messages are played again after all new messages
are played completely.
In idle:
1. Press <PLAY/STOP> to listen to messages and memos.
2. Press <PLAY/STOP> if you want to stop the playback.
3. Press <REPEAT/OGM> to skip back to the previous message
during message playback.
4. Press <FWD/MEMO> if you want to skip forward to the next
message during message playback.
5. Press <DELETE> if you want to delete the current message being
played.
9.9.2

Delete a Message on the TAM

1. Press <DELETE> while a message is playing.
2. You will hear a tone and the current message or memo playing will
be deleted. If there are more messages, the next message will
start to play.
58