Set The Recall (Flash) Time; Set The Key Tone; Set The Base Language; Change The System Pin - Binatone Concept Combo 3525 Twin User Manual

7.9

Set the Recall (Flash) Time

You may need to change the recall (flash) time if your phone is connected to
a PBX. The recall time options are SHORT (the default value of 100ms),
MEDIUM (300ms) or LONG (600ms).
In Idle:
1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.
3. Press <MENU/OK> and <UP/DOWN> to select the desired flash time,
from SHORT, MEDIUM and LONG.
4. Press <MENU/OK> to confirm.

7.10 Set the Key Tone

The Key Tone is a confirmation beep when you press any key. It is set on
by default, but can be turned off, if desired.
In Idle:
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> and <UP/DOWN> to select KEY TONE.
3. Press <MENU/OK> and <UP/DOWN> to select ON or OFF.
4. Press <MENU/OK> to confirm.

7.11 Set the Base Language

In Idle:
Press <MENU/OK> and <UP/DOWN> to select LANGUAGE.
1.
2. Press <MENU/OK> and <UP/DOWN> to select your desired language.
3. Press <MENU/OK> to confirm.
7.12

Change the System PIN

A 4-digit system PIN code is used for changing the system settings of the
base station, and is used to protect your phone from unauthorised use. The
default system PIN code is 0000.
1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.
3. Press <MENU/OK> and display will show "PIN?", enter the 4-digit PIN
(default setting is 0000) and press <MENU/OK>.
4. The display will show "NEW PIN", enter the new PIN and press
<MENU/OK>.
5. The display will show "REPEAT", enter the new PIN again, and press
<MENU/OK> to confirm.
Note: If the incorrect PIN is entered or the new PIN is not entered twice the
same, an error tone will be emitted and it will return to the previous menu.
If this takes a short time, press <C/MUTE> to return to the menu immediately.
SETTINGS.
45