Installing Your Phone; Connecting The Corded Base Station - Binatone Concept Combo 3525 Twin User Manual

2

INSTALLING YOUR PHONE

2.1

Connecting the corded base station

① Use the coiled cord to connect the corded handset to the base station,
making sure the plugs are inserted fully into the sockets on the handset
and on the side of the base, until they click in place.
② Plug the power supply cord & phone line cord into the sockets in the
back of the base station.
③ Plug the power adapter into a 230Vac, 50Hz mains socket, and the
line cord into your telephone line socket.
Warning: Use only the power adapter provided for the base station.
Warning: Always use the cables provided in the box, others may not be
compatible.
Note: The base unit needs mains power for normal operation, and the
cordless handset will not work without it. (If the mains power fails, calls can
still be made or received using the corded handset.)
Connect the
corded handset
If you have a Broadband line (ADSL)
If you connect your telephone to a line with a broadband (ADSL) connection,
you will need to insert a micro-filter between the telephone and the
telephone line, otherwise you may get interference between the telephone
and the broadband, which could cause problems.
In a home with broadband, every telephone must have a micro-filter
connected, not just the one at the telephone point that your modem is
connected to.
If you need more broadband (ADSL) micro-filters, contact your broadband
supplier.
Phone line cord
8
Power supply
cord