7.7
Ringer Setup
7.7.1
Change Ringer Melody
There are 10 base ringer melodies to choose from for external calls.
1.
Press <MENU/OK> and <UP/DOWN> to select SETTINGS.
2.
Press <MENU/OK> and <UP/DOWN> to select RING SETUP.
3.
Press <MENU/OK> to select
to select MELODY, then press <MENU/OK> to select
(the current melody, where X = 1 to 10).
Press <UP/DOWN> to scroll through the Melody list (from 1 to 10).
4.
5.
Press <MENU/OK> to confirm the setting.
Note: The respective ringer melody will be played during your selection.
7.7.2
Change Ringer Volume
You can adjust the volume level of the ringer for external calls with
settings with settings from 1 (the quietest) to 5 (loudest), or turn it OFF.
1.
Press <MENU/OK> and <UP/DOWN> to select SETTINGS.
Press <MENU/OK> and <UP/DOWN> to select RING SETUP.
2.
Press <MENU/OK> to select EXT. RING
3.
and <UP/DOWN> to select VOLUME, then press <MENU/OK> and
<UP/DOWN> to step through the volume level list Off, 1 to 5.
4.
Press <MENU/OK> to confirm the setting.
Note: The respective ringer volume will be played during your selection.
If VOLUME OFF is selected, the <Ringer Off> icon will display.
7.8
Set the Dial Mode
You should normally leave the dialling mode at its default setting of TONE
(also called DTMF) unless the phone is connected to an old exchange that
only recognises PULSE dialling.
In Idle:
1. Press <MENU/OK> and <UP/DOWN> to select SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DIAL MODE.
3. Press <MENU/OK> and <UP/DOWN> to select TONE or PULSE.
4. Press <MENU/OK> to confirm.
EXT. RING, then press <MENU/OK>
, then press <MENU/OK>
44
MELODY X