Clock & Alarm; Date & Time; Change Date Format; Change Time Format - Binatone iDECT Q2i System User Manual

7
CLOCK & ALARM
You can set date and time to be displayed in different formats, and set an alarm time.
7.1 Date & Time
7.1.1

Change date format

In Idle:
1. Press <Menu> and <UP/DOWN> to scroll to Clock/Alarm .
2. Press <Select> and <UP/DOWN> to scroll to Date & Time .
3. Press <Select> and <UP/DOWN> to scroll to Date Format .
4. Press <Select> and <UP/DOWN> to scroll to your desired date format of either
DD-MM-YYYY or MM-DD-YYYY
5. Press <Select> to confirm.
7.1.2

Change time format

In Idle mode:
1. Follow steps 1 to 2 in Section 7.1.1 .
2. Press <Select> and <UP/DOWN> to scroll to Time Format .
3. Press <Select> and <UP/DOWN> to scroll to your desired time format of either
12 Hours or 24 Hours .
4. Press <Select> to confirm.
7.1.3

Set the date

In Idle mode:
1. Follow steps 1 to 2 in Section 7.1.1
.
2. Press <Select> and <UP/DOWN> to scroll to Set Date .
3. Press <Select> and enter the date according to the date format you set in Section 7.1.2
Note: If an invalid data is detected, an error tone will sound and the cursor will stop
at the incorrect input.
4. Press <OK> to confirm and save the new date.
7.1.4

Set the time

In Idle mode:
1. Follow steps 1 to 2 in Section 7.1.1 .
2. Press <Select> and <UP/DOWN> to scroll to Set Time .
3. Press <Select> and enter the time according to the time format you set in Section 7.1.1
Note: If incorrect input is detected, an error tone will be emitted and the cursor
will stop at the incorrect input.
4. When the cursor is at the AM/PM field, press <UP/DOWN> to select AM or PM
Note: Time input is time format dependent. Use 24 hours input if time format is 24 hours.
5. Press <OK> to confirm.

7.2 Alarm

You can use the iDECT Q2i handset as an alarm clock. When an alarm is set,
the <ALARM Icon> is shown on the handset display .
When the alarm time is reached, the <ALARM icon> and " Alarm On " flash on
the display, and the alarm melody is played for 45 seconds or until a any handset key
is pressed.
If snooze function is activated,
the alarm will repeat every 2 minutes, unless <Off> or <TALK OFF> are pressed
while the alarm is sounding.
16
.
.