Read These Notes First; Choosing A Site For The Base Unit And Charger Pod; Radio Signals Between Handset And Base Unit; Mains Power Connection - Binatone SYMPHONY 2600 User Manual

Table of Contents

Advertisement

Read these notes first

Choosing a site
The base unit and charger pod(s) should be placed on a
for the base
level surface, in a position where:
unit and
the mains adapter plug will reach an easily accessible
charger pod
230-V
switched mains supply socket — never try
AC
to lengthen the mains power cable
the base unit's telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
it is not close to another telephone — this can cause
radio interference
it is not close to a sink, bath or shower, or anywhere
else where it might get wet
it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
If you're using the SMS text messaging facility,
!
please note that only one SMS phone connected to
the line can receive messages. So you shouldn't
connect another SMS-compatible phone to the same
line as your Symphony
Radio signals
To use your handset and base unit together, you must
between
be able to establish a radio link between them. Be
handset and
aware that:
base unit
Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
Other solid structures, like walls, may reduce the
signal strength.
Mains power
IMPORTANT — The Symphony
connection
charger pod must be used with the mains adapter
supplied with the unit. Using any other adapter will
result in non-compliance with EN60950, and will
invalidate any approval given to this apparatus.
Binatone Help Line: 0845 345 9677
2600.
2600 base unit and
3
(Local Call rate)

Advertisement

Table of Contents
loading

Table of Contents