Midea MSH-07CRN1, MSH-07HRN1, MSH-09CRN1, MSH-09HRN1, MSH-12CRN1, MSH-12HRN1 Manual page 208

8.9.4 Defrosting Actions:
Compressor
4-way Valve
Outdoor Fan
Indoor Fan
8.9.7 Turn into heating mode, turn off the heating mode in 7 minutes.
8.10 Automatic operation mode
8.10.1 The air conditioner automatically selects one of the following operation modes: cooling, heating or
fan only according to the temp. difference between room temp. (TA) and set temp. (TS).
TA¡ ª TS
TA¡ ª TS>2¡ æ
-1¡ æ ¡ Ü TA¡ ª TS¡ Ü +2¡ æ
TA¡ ª TS<-1¡ æ
8.10.2 The indoor fan blows automatically in corresponding selected mode.
8.10.3 The motion of indoor fan's blade should accord with the selected operation mode.
8.11 Forced cooling function
8.11.1 Select forced cooling function with the forced cooling button or the switch.
8.11.2 The compressor is unconditionally turned on, after 30 minutes cooling operation whose fan mode is
set as low, the A/C operates at the DRY mode with a set temp. of 24¡ æ .
8.11.3 All protections of remote control cooling are available at forced cooling operation.
8.12 Forced Auto function
Select forced auto function with the forced auto button or the switch.
In forced auto status the A/C operates at remote control mode with a set temp. of 24¡ æ .
8.13 Timer Function
8.14 Economic Running
8.14.1 The economic running function is available at cooling, heating or auto mode.
8.14.2 Cooling:
The set temperature rise 1¡ æ
constant and the fan speed is kept at low speed.
8.14.3 Heating:
Defrost 10or 6minutes
45S
40S
10S
Operation mode
Cooling
Fan-only
Heating (air-only for cooling only type)
per hour. Two hours later, the set temperature will maintain as a
92
25S
23S