Midea MSH-07CRN1, MSH-07HRN1, MSH-09CRN1, MSH-09HRN1, MSH-12CRN1, MSH-12HRN1 Manual page 162

8.8.2. Forced Auto
8.8.2.1 Remote control signal can be received in forced auto mode. When receiving the signals, the
forced auto mode will be canceled and the A/C changes to remote control status and performs
operation as the signals indicates.
8.8.2.2 The system performs control according to the remote control auto mode with a set temperature of
24°c.
8.9 Timer
24 hours timer on or off.
8.10 Protecting Function
8.10.1 Compress with a delay of 3 minutes.
8.10.2 Sensor open and break protection
8.10.3 EEPROM error protection.
8.10.4 Current protection function.
Current up
Current up down
8.10.5 Out door unit protection
Refer to clause 7.2 Outdoor unit
8.11 Auto restart Function
8.12 Models and Parameters
Model
I3SEC
I5MIN
IFAN
IRESTORE
TE1
TE2
TE3
TE4
TE5
TE6
TE7
TE8
TE9
TE10
TE11
TE14
TE16
I=Current value Outdoor fan
I< I3 On
I3<I< I2 Off
I2<I< I1 Off
I>I1 Off
I>I1 Off
I2<I< I1 Off
I4<I< I2 Off
I< I4 On
MSG-36CR MSG-36HR
34A 34A
32A 32A
25A 25A
22A 22A
30
37
34
24
2 2
12 12
63
54
50
70
65
32
34
Compressor
On
On
Turn off compressor after 5 minutes
Turn off compressor after 3 seconds
Turn off compressor after 3 seconds
Turn off compressor after 5 minutes
On
On
126