Midea MSH-07CRN1, MSH-07HRN1, MSH-09CRN1, MSH-09HRN1, MSH-12CRN1, MSH-12HRN1 Manual page 137

8.10.1 The air conditioner automatically selects one of the following operation modes: cooling,
heating or fan only according to the temp. difference between room temp. (TA) and set
temp. (TS).
TA¡ ª TS
TA¡ ª TS>2¡ æ
-1¡ æ ¡ Ü TA¡ ª TS¡ Ü +2¡ æ
TA¡ ª TS<-1¡ æ
8.10.2 The indoor fan blows automatically in corresponding selected mode.
8.10.3 The motion of indoor fan's blade should accord with the selected operation mode.
8.11 Forced cooling function
8.11.1 Select forced cooling function with the forced cooling button or the switch.
8.11.2 The compressor is unconditionally turned on, after 30 minutes cooling operation whose
fan mode is set as low, the A/C operates at the DRY mode with a set temp. of 24¡ æ .
8.11.3 All protections of remote control cooling are available at forced cooling operation.
8.12 Forced Auto function
Select forced auto function with the forced auto button or the switch.
In forced auto status the A/C operates at remote control mode with a set temp. of 24¡ æ
8.13 Timer Function Requirement
8.14 Economic Running
8.14.1 The economic running function is available at cooling, heating or auto mode.
8.14.2 Cooling:
The set temperature rise 1¡ æ
as a constant and the air circulation is kept at low speed.
8.14.3 Heating:
The set temperature decrease 1¡ æ
maintain as a constant and the air circulation is kept at low speed (Cold air proof function
takes precedence over all).
8.14.4 Auto:
The economic running function operates in accordance with selected running mode.
8.15 Auto restart function
In case of a sudden power failure, this function automatically sets the unit to previous
settings before the power failure when power returns.
Operation mode
Cooling
Fan-only
Heating (air-only for cooling only type)
per hour. Two hours later, the set temperature will maintain
per hour. Two hours later, the set temperature will
155