Power Supply; Unit Holder - Becker MAP PILOT Instructions For Use Manual

>>> GENERAL OPERATION

Power supply

> USE
Your Becker® MAP PILOT has an inte-
grated rechargeable battery. The battery is
> FR
charged as soon as the Becker® MAP
> ES
PILOT is placed in the holder and the ve-
hicle ignition is switched on.
Note:
Note that if the battery is completely dis-
charged, it may take up to a minute be-
fore the Becker® MAP PILOT can be
activated again.
11

Unit holder

The Becker® MAP PILOT is inserted in
the holder in the vehicle's glove compart-
ment.
When inserting the Becker® MAP
PILOT make sure that it is pushed in un-
til it stops.
To remove the Becker® MAP PILOT
from the holder, push the slide at the front
of the holder.
WARNING
Risk of accident.
Do not remove or insert the Becker®
MAP PILOT while the vehicle is in mo-
tion.
Remove or insert the Becker® MAP
PILOT only when the vehicle is station-
ary.
Note:
The slide can be pulled out. When the
slide is pulled out, the Becker® MAP
PILOT cannot be unlocked. This can
serve as an additional protection against
theft.
To unlock the Becker® MAP PILOT the
slide can only be inserted one way.
The Becker® MAP PILOT is released
and ejected a little way. You can now re-
move the Becker® MAP PILOT from the
holder.