Becker MAP PILOT Instructions For Use Manual page 44

>>> NAVIGATION MODE
> In the Route menu, select
> Select
> USE
Block road ahead
> FR
> ES
> By turning the rotary control/push but-
ton you can select the starting point of
the block.
> Press the rotary control/push button to
confirm the starting point.
> By turning the rotary control/push but-
ton you can now select the end point of
the block.
> Press the rotary control/push button to
confirm the end point.
43
.
Block ahead
.
> Select
Yes
The block is activated and the new route
is calculated.
Block an area
Note:
You can block up to 10 areas.
> In the Route menu, select
> Select
Block area
The map appears with a rectangle that
shows area to be blocked.
> Search for the desired blocking area.
to activate the block.
.
Block ahead
.
Note:
Turn the rotary control/push button to
change the scale of the map display.
Push the rotary control/push button to
move the displayed rectangle to the de-
sired position.
> Press the rotary control/push button.
> Select to block this area.
Yes
The blocking is activated and the system
should not use this area for future route
calculations.